Services Visual management boardsSafety signageBanner printingLaser engraved awardsAcrylic display casesCustom business signsAcrylic fabrication
Portfolio Compliance Blog Contact Español Get a quote

Acrylic letters for a lobby or storefront: thickness and mounting

Thickness, color and mounting: what separates custom acrylic letters from ones that look like a sticker once you stand close.

· 4 min · Custom business signs

Dimensional logo on a textured reception wall · TRUST Dental Care
TRUST Dental CareDimensional logo on a textured reception wall

From across the parking lot, any acrylic letter looks fine in a photo. Up close, in a lobby where the client walks two feet from the logo, thickness and mounting decide whether it reads as a real sign shop or a thick sticker.

The thickness that holds up close

A 3 mm letter looks thin at lobby distance: the edge barely registers and the letter reads like a decal. Past 10 mm the edge starts giving real depth, and on a storefront, where people stand farther back, that same thickness also holds up better against wind.

Color depends on where the letter sits. White or clear acrylic over a backlit panel reads day and night; solid colored acrylic looks great by day but loses punch without light behind it.

Mounted off the wall, not stuck flat

The difference between a letter that looks factory made and one that looks improvised is the standoff: hardware that holds the letter a few millimeters off the wall, casting its own shadow, instead of lying flat against the surface.

Letter by letter acrylic on a colored wall
Letter by letter acrylic on a colored wall, mounted on standoffs so each piece casts its own shadow.

That shadow is what makes the logo look three dimensional in the lobby photo, not just on the screen where it was designed.

The same principle applies if the acrylic is painted from behind or backed with colored vinyl: what the lobby actually sees is not the piece alone, it is the piece plus the shadow the standoff creates, and that gap also hides wiring when the letters are lit.

Interior versus exterior changes the material

Indoors, plain acrylic holds up fine on its own. On a storefront, the piece takes direct sun every day, so we use acrylic built for exterior exposure and hardware that holds up to coastal humidity without corroding, the same letters we install from Tijuana to San Diego.

If the facade also gets lit, we spec the electrical connection at the quote stage, not on installation day. And if the wall is stone or brick instead of drywall, the anchoring changes too, which is why the on site measuring visit checks that before we quote.

What to send for a quote

A vector file of your logo or a clear photo, the measurement of the wall and whether you want lighting. We come back with recommended thickness, finish and installed price, with installation included and a one year written warranty.

If the building sits on the US side, the quote still works the same way: we measure, fabricate in Tijuana and either deliver across the border or have the piece ready for pickup, fifteen minutes from Otay Mesa.

What thickness do you recommend for a lobby?

Between 10 and 15 mm gives real depth without going heavy. On a storefront, if the letter is large, we go thicker so it holds up against wind.

Does colored acrylic fade in the sun?

Acrylic without exterior protection does lose intensity outdoors over the years. That is why we use acrylic built for that exposure on facades.

Can you light the letters?

Yes, with backlighting or front lit letters, depending on the effect you want and the wall they go on.

← See all insights

The service that solves this

We fabricate and install acrylic signs, 3D letters, illuminated signage and vinyl graphics for storefronts and interiors. Our installed work is on both sides of the border, from notary lobbies in Tijuana to retail fronts, with installation included and a one year warranty.